TTI-UC-S-705

TRANSFER
Gain 30 dB ± 2 dB
Gain adjust 30 dB range in 1dB steps (digital)
1 dB range in 0.1 dB steps (analogue)
Gain flatness ± 0.25 dB over IF bandwidth ± 5 MHz
Gain slope <0.04 dBm / MHz
Gain stability <± 0.1 dB per day at constant temperature
Noise figure < 25 dB
Group delay response <± 0.5ns (1ns ptp)
AM/PM conversion 0,1 °/dB
Phase Noise <-38 dBc/Hz @ 1 Hz
<-52 dBc/Hz @ 10 Hz
<-66 dBc/Hz @ 100 Hz
<-84 dBc/Hz @ 1 KHz
<-90 dBc/Hz @ 10 kHz
<-102 dBc/Hz @ 100 kHz
External frequency reference 10 MHz
Phase noise (external reference) <-120 dBc/Hz @ 1 Hz
<-134 dBc/Hz @ 10 Hz
<-143 dBc/Hz @ 100 Hz
<-150 dBc/Hz @ 1 KHz
<-152 dBc/Hz @ 10 kHz
<-153 dBc/Hz @ 100 kHz
top
INPUT
Input frequency range 70 MHz ± 5 MHz
Nominal input level -30 dBm
Input level range -40 to -10 dBm
No damage max. input level 10 dBm
Input Impedance 50 ohm
Input return loss @ 50 Ohm > 20 dB
Input signal monitor -20 dB ± 5 dB
top
OUTPUT
Output frequency range 5005.0275 MHz ± 5 MHz
Output 1dB compression > 10 dBm
Output Impedance 50 ohm
Output return loss @ 50 Ohm > 20 dB
Output signal monitor < -20 dB ± 5 dB
Intermodulation -50 dBc (2 carriers at 0 dBm output power)
Spurious outputs Signal related < -65 dBc @ 0 dBm
Signal independent <-97 dBm
Carrier mute (ON/OFF capability) -70 dB minimum
top
PHYSICAL & INTERFACES
Size 120mm x 100mm x 40mm (without oscillator)
Weight < 600 gr (without oscillator)
Input IF Connector SMA (f)
Output RF Connector SMA (f)
Signal Monitor Connector SMA (f)
Supply Connector DB9
Control Connector DB15
top
POWER SUPPLY
DC Voltage 12 VCC, 5 VDC, -5VDC
top
ENVIRONMENTAL
Operating temperature -10ºC to +55ºC
Storage temperature -30ºC to +70ºC
top